EnergyLogic EL-375B
A mid-size EnergyLogic waste oil boiler that also accepts up to 90W gear oil, for larger radiant-floor and hydronic systems.
EL-375B at a glance
| Heat input | 375,000 BTU/hr |
|---|---|
| Fuel flow | 2.7 gal (10.2 L)/hr |
| Approved fuels | Used crankcase oil, ATF, hydraulic fluid, No. 2 fuel oil, up to 90W gear oil |
| Max water output temp | 230 °F (110 °C) |
| Domestic hot water | 6.0 gal (22 L)/min at 100 °F rise |
| Boiler capacity | 43 gal (162.8 L) |
| Dimensions | 50" H × 28" W × 54.25" D |
| Exhaust flue | 8" diameter |
| Electrical | 115 VAC, 60 Hz, 20 A |
| Shipping weight | 1,450 lb with tank / 1,025 lb without |
Who the EL-375B is for
A mid-size EnergyLogic waste oil boiler that also accepts up to 90W gear oil, for larger radiant-floor and hydronic systems.
Best fit: Larger shops and multi-zone radiant systems, especially where gear oil is part of the waste stream.
Standard equipment
Integrated air compressor, barometric damper, draft gauge, precision fuel-meter pump, wet-floor heat exchanger, analog hour meter, 250 gal single-wall tank.
Approved fuels
Used crankcase oil, ATF, hydraulic fluid, No. 2 fuel oil, up to 90W gear oil.
Sizing and savings
Square footage is only a starting point. Ceiling height, the number and size of overhead doors, insulation and how much used oil your shop produces all affect which size is right. We'll ask about all four before recommending a unit.
How much you save depends on how much used oil you generate, what you pay for heating fuel now, and how long your heating season runs. Our waste oil savings calculator gives a quick estimate.