EnergyLogic EL-200H
The most popular EnergyLogic furnace size: enough output for a mid-size service shop or equipment bay, with a 2,000 °F-rated stainless heat exchanger.
EL-200H at a glance
| Heat input | 200,000 BTU/hr |
|---|---|
| Heats up to | 5,000 sq ft |
| Fuel flow | 1.4 gal (5.3 L)/hr |
| Warm air temp rise | 100–120 °F |
| Air flow | 1,500 CFM |
| Warm air outlet | 15" W × 15" H, dual ductible |
| Heat exchanger | 18 ga stainless, UL rated 2,000 °F |
| Cabinet | 18" H × 18" W × 105" L |
| Exhaust flue | 8" diameter |
| Electrical | 115 VAC, 60 Hz, 25 A |
| Shipping weight | 750 lb with tank / 395 lb without |
Who the EL-200H is for
The most popular EnergyLogic furnace size: enough output for a mid-size service shop or equipment bay, with a 2,000 °F-rated stainless heat exchanger.
Best fit: Truck and equipment repair shops, dealership service departments and fleet maintenance bays up to about 5,000 sq ft.
Standard equipment
Integrated air compressor, barometric damper, draft gauge, squirrel-cage blower, precision fuel-meter pump, analog hour meter, 250 gal single-wall tank.
Approved fuels
Used crankcase oil, ATF, hydraulic fluid, No. 2 fuel oil, diesel.
Sizing and savings
Square footage is only a starting point. Ceiling height, the number and size of overhead doors, insulation and how much used oil your shop produces all affect which size is right. We'll ask about all four before recommending a unit.
How much you save depends on how much used oil you generate, what you pay for heating fuel now, and how long your heating season runs. Our waste oil savings calculator gives a quick estimate.