EnergyLogic EL-350H
The largest EnergyLogic warm-air furnace, built for big service buildings, heavy equipment shops and fleet facilities that generate plenty of used oil.
EL-350H at a glance
| Heat input | 350,000 BTU/hr |
|---|---|
| Heats up to | 9,000 sq ft |
| Fuel flow | 2.5 gal (9.4 L)/hr |
| Warm air temp rise | 100–120 °F |
| Air flow | 2,600 CFM |
| Warm air outlet | 15" W × 15" H, dual ductible |
| Heat exchanger | 18 ga stainless, UL rated 2,000 °F |
| Cabinet | 22" H × 22" W × 117" L |
| Exhaust flue | 8" diameter |
| Electrical | 115 VAC, 60 Hz, 25 A |
| Shipping weight | 770 lb with tank / 415 lb without |
Who the EL-350H is for
The largest EnergyLogic warm-air furnace, built for big service buildings, heavy equipment shops and fleet facilities that generate plenty of used oil.
Best fit: Large fleet, municipal and heavy equipment facilities up to about 9,000 sq ft per unit.
Standard equipment
Integrated air compressor, barometric damper, draft gauge, squirrel-cage blower, precision fuel-meter pump, analog hour meter, 250 gal single-wall tank.
Approved fuels
Used crankcase oil, ATF, hydraulic fluid, No. 2 fuel oil, diesel.
Sizing and savings
Square footage is only a starting point. Ceiling height, the number and size of overhead doors, insulation and how much used oil your shop produces all affect which size is right. We'll ask about all four before recommending a unit.
How much you save depends on how much used oil you generate, what you pay for heating fuel now, and how long your heating season runs. Our waste oil savings calculator gives a quick estimate.